GST C-9102 Conventional Photoelectric Smoke Detector

Fire Projects has installed C-9102 Conventional Photoelectric Smoke Detector various sites which is non-addressable. Used together with end of line unit, it can connect with compatible control panels to process detection signals.
C-9102 Conventional Photoelectric Smoke Detector supplied by Fire Projects shows fire alarm by LED indicators and transmits the fire signal to the control panel. Using infrared scattering technology, the smoke density can be detected. The detector receives very weak infrared light under normal smokeless condition. If smoke particles enter the chamber, the received light signal will increase by scattering. When smoke density reaches a pre-set level, the detector will alarm out. In order to reduce interference and power consumption, the emitting circuit works in pulse mode to prolong the life of IR LED.
- Twin LED for 360° view
- Remote indicator output available
- Complies with EN 54-7 standard
- Operating Voltage: 24VDC (12VDC~28VDC)Standby Current: ≤60μAAlarm Current: 10mA≤I≤30mAIndicators: Red. Quiet in normal condition. Illuminates steadily in alarm.Remote Indicator Output: Directly connecting with LED (built-in 2kΩ resistor in series). Quiet in normal condition. Illuminates steadily in alarm.Maximum Ripple Voltage: 4V (peak-to-peak)Alarm Clear: Instantaneous Power-off (5s Max., 2.5VDC Max.)Power-up Time: ≤10sMax. Wind Speed: 7.6m/s (1500fpm)Wiring Polarized: 2-core for detection zone cable. Polarized 2-core for remote indicator.Ambient temperature: -10℃~+50℃Relative Humidity: ≤95%, non condensingIngress Protection Rate: IP23Material and Color of Enclosure: ABS, white (RAL 9016)Dimensions: Diameter: 100mmHeight: 56mm (with base)Mounting Hole Distance: 45mm~75mmWeight: About 120g